933 GrieveNo. 933 is a gas-heated, 250°F vertical conveyor oven from Grieve, currently used for post curing silicone rubber parts inside cardboard boxes.  Workspace dimensions measure 10’ W x 13’ D x 12’ H.  42 trays, each 72” wide x 23” long and rated for 100 lb. loading on 34” centers, lower vertically and pass back into the heating zone, then exit at the top of the heating zone and pass downward through cooling.  (One tray shown in photo)

Two 6,000 CFM, 5 HP recirculating blowers provide a total 12,000 CFM vertical upward airflow to the loads.  Four 24” diameter tubeaxial fans are each driven by a 5 HP motor to push/pull air through the cooling zone on this Grieve conveyor oven.

No. 933 features 4” insulated walls, a removable top-mounted heat chamber (shown removed in photo), aluminized steel interior and exterior, plus two independent doors for access to the workspace.

All safety equipment required by IRI, FM and NFPA Standard 86 for gas-heated equipment are onboard this oven, including a 975 CFM, 1 HP powered forced exhauster for combustion venting.

This Grieve vertical conveyor oven is built to all applicable JIC/NEMA 12 electrical standards.

For more information, please contact:

500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s