Hycorr — A Company of First’s Continues the Trend

Posted: June 21, 2010 in Press Releases, Siemens General Motion Control
Tags: , , ,

Corrugated boxmaking machine builder saves 50 percent on components, 30 percent on control cabinet footprint with comparable performance

Fred Harrison, president of Hycorr Machine Corporation, a Kalamazoo, Mich. builder of corrugated boxmaking machinery, has always believed in being first.  That competitive and can-do spirit meets every visitor to his company’s website, where a number of Hycorr first’s are listed.  The company was the first U.S. rotary die-cutter to introduce an integrated stacker, the first U.S. builder to introduce the reverse angle doctor blade on rotary die-cutters and the first builder in the world to offer an automatic cutting-anvil speed compensator, Auto-CompTM, which was later joined by Hycorr inventions of a quick-change anilox roll system and modular dwell section with inter-station dryers.  All these innovations to the industry were achieved in the first 15 years of operation for this company, founded by Fred Harrison in 1985.

Never one to rest on his laurels, Harrison recently put his engineering team on the task of improving the overall controls package on the company’s line of rotary die-cutters.  In particular, the servo system and total controls package needed upgrading with newer technology.  The previous technology functioned properly and to a satisfactory degree to keep the company competitive in the paperboard container industry, but Hycorr engineers were seeking increased cost containment and a reduced footprint, with no loss in performance on their machines.

After considerable research, and based on the direct experience of a recently hired engineer, Hycorr began its investigation of a totally new system, one that would not only reduce servo drive system and related energy costs, but also integrate both the programmable logic controller (PLC) and human-machine interface (HMI) functions.

Hycorr’s electrical engineer, Mike Walter explains, “We have been building servo driven rotary die-cutters for over 10 years.  We wanted to look at a new system for a series of machines that were being built for new customers.  After the first price pass, we knew we needed to continue our talks with Siemens.”  The package under consideration included servo motors, Sinamics® S120 servo drives, and a Simotion® D motion controller with PLC functionality.  Walter continues, “At first, we were only considering this new system for the motion platform.  We needed a servo system that would eliminate some gears and maintain the tight tolerances our customers expected for printing and diecutting.  We really needed a system with built-in rotary motion functionality.”

Siemens provided the Simotion Shaftless Standard to Hycorr, which greatly reduced this customer’s engineering time.  The solution reduced Hycorr’s costs in both hardware and engineering time in terms of the product acquisition as well as the operating energy costs associated with these typically high power-consuming machines.  Walter and his team determined that the Siemens motors and drives package was an ideal replacement for the previous vendor’s technology, plus the seamless integration of the PLC and HMI afforded Hycorr additional advantages in control and operational flexibility.

In the proposed implementation of the new solution, each technology (motion, PLC and HMI) had built-in connectivity to the others, making assembly time another area for major savings for this machine manufacturer.  Overall, the savings for Hycorr was calculated to be approximately 50 percent,

Capping the decision to make the switch to the Siemens solution was a footprint reduction of 30 percent in control cabinet space.  As Walter simply puts it, “The components were smaller.  With the combination of the active interface module and active line module, we eliminated the need for line reactors or line filters, thereby saving space, plus mounting and hardwiring time.”  Complementing these savings, the Siemens servomotors specified for comparable performance levels were considerably smaller and less expensive to operate than the previous units used.

Working under a tight deadline, the first rotary die-cutter was built and commissioned onsite by Hycorr and Siemens at the end user’s plant.  Shortly thereafter, the second machine, needed by another Hycorr customer, was built on a production schedule that Fred Harrison would deem another first for the company in its speed.  This improvement in engineering, production and assembly time resulted from the Simotion Shaftless Standard provided at no cost by Siemens to its customers.  This Shaftless Standard enabled Hycorr engineers to do much more modular implementation of components plus the interfaces of the overall motion system to the controls architecture.  By this process, Hycorr saved approximately 80 percent of its engineering time on the machine build.  The entire engineering file for the first machine was loaded from a single compact flash drive and, with minimal debugging, the engineering on the second machine was completed quickly.  This demonstrated the serial machine benefits of Simotion, according to Mike Walter.

Components used on the machine builds at Hycorr included Siemens Sinamics S120 drives, Simotion D425 motion controller, 1PH7 servomotors and Simatic® S7 PLC for simple Windows-based operator interface.  As part of the Shaftless Standard package, Hycorr is able to make custom modifications to the various options offered on its rotary die cutters, without extensive engineering time.

Fred Harrison concludes, “Hycorr will continue to strive to be first on the market with many innovations, always maintaining the highest quality standards of machine performance.  No customer will ever be a trial case for us.  We deliver productivity to our customers’ bottom line because we’ve invested in maximizing our own.”

For more information on this story, please contact:

Hycorr Machine Corporation
5801 East Kilgore Road
Kalamazoo, MI  49048
Phone:  269-381-5905
Fax:  269-381-5914
Web:  www.hycorr.com
Email:  info@hycorr.com
Attention:  Fred Harrison, President or Mike Walter, Electrical Engineer

Or

SIEMENS INDUSTRY, INC.
Drive Technologies — Motion Control
390 Kent Avenue
Elk Grove Village, IL 60007
Phone: 847-640-1595 Fax: 847-437-0784
Web: www.usa.siemens.com/motioncontrol
Email: SiemensMTBUMarCom.industry@siemens.com
Attention: John Meyer, Manager, Marketing Communications

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s