Posts Tagged ‘industrial ad agency’

No. 1042 is a 2000°F (1093°C), gas-fired heavy-duty furnace from Grieve, currently used for heat treating at the customer’s facility. Workspace dimensions of this furnace measure 30” W x 60” D x 30” H.  750,000 BTU/HR are installed in four modulating natural gas burners with a floor mounted combustion air blower. Burners fire below hearth, with 9” thick insulated walls comprising 5” thick 2300°F ceramic fiber, 4” 1900°F block insulation and 8 1/2” floor insulation made from 4 ½” of 2300°F firebrick and 4” of 1900°F block insulation.

This Grieve furnace has two lanes of roller rails supported by firebrick piers and an air-operated platform with roller rails to bridge from loading table to workspace. Features include a ¼” plate steel exterior reinforced with structural steel, ½” steel faceplate at doorway and an air-operated vertical lift door.

Other features include safety equipment required by IRI, FM and National Fire Protection Association Standard 86 for gas-heated equipment plus a free-standing 390 CFM high-pressure combustion blower.

Controls on the No. 1042 include a digital indicating temperature controller and manual reset excess temperature controller with separate contactors.

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, IL  60073-2898
Phone:  (847) 546-8225
Fax:  (847) 546-9210
Web:  www.grievecorp.com
Email:  sales@grievecorp.com
Attention:  Frank Calabrese, VP

Advertisements

Complete Unit for Cutting and Trimming Beef, Pork and Poultry

TurboTrimHandTool

Photos show unit variations and the flex shafts that supply the rotary power transmission, when in use.

Rome, Georgia – Suhner Industrial Products, LLC introduces the TurboTrim – a complete unit for cutting and trimming beef, pork and poultry. The unit has multiple sized trimmers available for use in the different steps of the meat cutting process, helping to increase productivity, performance and product yield.

Features of the unit include high-quality, long-lasting stainless steel blades which require fewer sharpenings, a coated housing which runs smoothly and quietly with minimal vibration and a patented, adjustment free housing with fewer moving parts to save time. The TurboTrim has a hard plastic handle which is ergonomically designed for operator comfort and a lightweight handpiece to enhance operator performance and reduce fatigue.

TurboTrim knives are based on the principle of a rotating round knife, and manufactured with the highest Swiss quality and precision.

The TurboTrim has a stainless steel motor assembly featuring a slide out bracket which allows motor to be easily removed for cleanup without the use of tools. Downtime is reduced with a quick change assembly for flexible shaft replacement.

This slideshow requires JavaScript.

For more information, please contact:

SUHNER Industrial Products, LLC
43 Anderson Road SW
P.O. Box 1234
Rome, GA 30161
Phone 706/235-8046
Fax 706/235-8045
info.usa@suhner.com
www.suhner-abrasive-expert.com

Attention: Guido Broder, President

Unit performs a variety of machining tasks with interchangeable hand pieces

Rome, Georgia – Suhner introduces the Rotomax flexible shaft machine, a unique unit with interchangeable hand pieces that allow a user the freedom to perform a wide variety of machining operations with a single machine. The Suhner Rotomax functions as an angle grinder, straight grinder, drum polisher, belt sander, tube polisher or die grinder, simply by changing the hand piece. This new machine has myriad applications in industrial steel fabrication, polishing operations, sheetmetal assembly, food processing and foodservice equipment builds, appliance manufacturing, various stainless steel fabrications including medical and more.

The Suhner Rotomax offers users a range of power from 2.0-4.7HP and features electronically-controlled speeds ranging from 500-15,000 RPM in increments of 100 RPM at the touch of a button. The combination of an industrial grade motor and solid-state electronic control ensure constant speed and torque during any application. With no gearing, the Rotomax operates very quietly.   Other features include soft start, integrated braking and an LED-displayed speed gauge.

The Rotomax is offered as a hanging model, for the user wishing to keep the power flex shaft above the work; on the basic stand, which can be mounted wherever the user desires; or on a specially-designed stable trolley (STM) for portability around the work shop or production line.

For more information, please contact:

SUHNER Industrial Products, LLC
43 Anderson Road SW
P.O. Box 1234
Rome, GA 30161
Phone 706/235-8046
Fax 706/235-8045
info.usa@suhner.com
www.suhner-abrasive-expert.com
Attention: Aaron Beck, National Sales Manager, Abrasives & Power Tools

Ann Arbor, Michigan – German Machine Tools of America (GMTA) today announces the appointment of Dan Thomas as Project Manager for this major supplier of various machine tools, lasers and parts washers to the North American automotive, off-highway, heavy equipment and other power transmission markets.

GMTA Vice President Scott Knoy comments, “We welcome Dan to our team. His role will be a vital part of our ongoing efforts to be more customer-centric, as we expand our machine offerings, penetrate new markets and expand existing ones.”

Thomas will be responsible for the end-to-end coordination of the project flow at GMTA, from initial contact through commissioning of machines and systems onsite.

GMTA is a major supplier of machining centers, integrated laser-based work cells, fully-automated parts washing lines and related tooling, focusing primarily on gear, spline and other power transmission components.

See us at IMTS!

For more information, please contact:

GMTA (GERMAN MACHINE TOOLS OF AMERICA)
4630 Freedom Drive
Ann Arbor, MI 48108
Phone: 734-973-7800
Fax: 734-973-3053
Web: www.gmtamerica.com
Email: scott@gmtamerica.com
Attention: Scott Knoy, VP

 

Responding to growth in sales and expanded market opportunities, industry leader in rubber injection presses adds to staff 

Derek Williams National Sales Director REP Corporation

Derek Williams
National Sales Director
REP Corporation

Bartlett, IL – REP Corporation announces the appointment of Derek Williams to the new position of National Sales Director, effective immediately.   This move represents a return of Mr. Williams to the REP team, where he previously served as a Regional Sales Manager.

Commenting on the appointment, REP Corporation President Tim Graham observed,

“We welcome Derek back to REP. He brings us over 20 years in the rubber industry and his market knowledge is backed by very strong technical machine and material processing know-how. His new role at REP will bring us additional strength in project management and best practices. Current and future customers will benefit from Derek’s hands-on experience plus his knowledge of our company’s leading edge press technologies.”

For more information on this announcement, please contact:
REP Corporation, 8N740 Tameling Court, Bartlett, IL 60103-8146. Phone: 847-697-7210. Fax: 847-697-6829. Web: www.repinjection.com.  Email: tgraham@repcorp.com. Attention: Tim Graham, President.