Posts Tagged ‘Industrial PR’

 

Rattunde, a leading builder of tube and bar processing machinery, is hosting a Technology Open House to celebrate its 10-Year anniversary at the company’s North American headquarters in Caledonia, MI. The two-day event kicks off on Thursday, September 15th and runs through Friday, September 16th, 2016. The anniversary celebration starts at 5 pm on Thursday, while the Technology Open House takes place on Thursday and Friday from 9 am to 4 pm.

At the Technology Open House, visitors will have the opportunity to see and learn about Rattunde machining production systems on various applications through the fully operational production unit in-house and the live machine demonstrations featuring new technology. On-site technical discussions will be conducted and requests can be made for personal meetings with technical experts. Meals will be provided.

Don’t miss this exciting opportunity to learn about Rattunde’s capabilities and celebrate their milestone anniversary! RSVP by August 15th, 2016, to Janelle McFarlane at 616-940-3340 x 207 or J.McFarlane@rattunde-corp.com.

For more information, please contact:

Janelle McFarlane
Project Coordinator
RATTUNDE CORPORATION
5080 Beltway Dr. SE
Caledonia, MI 49316
Telephone: 616-940-3340 x 207
www.rattunde-corp.com
J.McFarlane@rattunde-corp.com

 

Rattunde is a leader in the high speed, high precision sawing and machining production systems for tubes and solid bars. Operations performed on Rattunde production systems include sawing, machining, inspection, wash/dry and packaging.

Advertisements

Complete Unit for Cutting and Trimming Beef, Pork and Poultry

TurboTrimHandTool

Photos show unit variations and the flex shafts that supply the rotary power transmission, when in use.

Rome, Georgia – Suhner Industrial Products, LLC introduces the TurboTrim – a complete unit for cutting and trimming beef, pork and poultry. The unit has multiple sized trimmers available for use in the different steps of the meat cutting process, helping to increase productivity, performance and product yield.

Features of the unit include high-quality, long-lasting stainless steel blades which require fewer sharpenings, a coated housing which runs smoothly and quietly with minimal vibration and a patented, adjustment free housing with fewer moving parts to save time. The TurboTrim has a hard plastic handle which is ergonomically designed for operator comfort and a lightweight handpiece to enhance operator performance and reduce fatigue.

TurboTrim knives are based on the principle of a rotating round knife, and manufactured with the highest Swiss quality and precision.

The TurboTrim has a stainless steel motor assembly featuring a slide out bracket which allows motor to be easily removed for cleanup without the use of tools. Downtime is reduced with a quick change assembly for flexible shaft replacement.

This slideshow requires JavaScript.

For more information, please contact:

SUHNER Industrial Products, LLC
43 Anderson Road SW
P.O. Box 1234
Rome, GA 30161
Phone 706/235-8046
Fax 706/235-8045
info.usa@suhner.com
www.suhner-abrasive-expert.com

Attention: Guido Broder, President

 

No. 866 is a 550° (288°C) belt conveyor oven from Grieve, currently used for heat treating coiled spring steel at the customer’s facility. Workspace dimensions of this oven measure 18” W x 20’ D x 15” H. 60 KW are installed in Nichrome wire heating elements to heat the oven, while a 4200 CFM, 3 HP recirculating blower provides vertical downward airflow to the workload.

The oven travel comprises an 1-1/2’ long open belt loading zone, 20’ long insulated heat zone with recirculated airflow, 1’ long open zone, plus a 12’ long cooling zone and an 1-1/2’ long open unloading zone.

This Grieve belt conveyor oven features 4” insulated walls, aluminized steel exterior and stainless steel interior. Two 12” diameter tubeaxial fans, each driven by a ½ HP motor, push/pull air through cooling zone and a 12” wide, ½” x ½” high carbon steel flat wire conveyor belt with 1/3 HP motor drive, variable from 16 to 44 inches per minute, are also onboard the oven.

Controls on the No. 866 include a 10” diameter circular chart recording temperature controller and a manual reset excess temperature controller.

 

For more information, please contact:

THE GRIEVE CORPORATION
500 Hart Road
Round Lake, Illinois 60073-2835 USA
Phone: (847) 546-8225
Fax: (847) 546-9210.
Web: www.grievecorp.com.
Email: sales@grievecorp.com.
Attention: Frank Calabrese.

Unit performs a variety of machining tasks with interchangeable hand pieces

Rome, Georgia – Suhner introduces the Rotomax flexible shaft machine, a unique unit with interchangeable hand pieces that allow a user the freedom to perform a wide variety of machining operations with a single machine. The Suhner Rotomax functions as an angle grinder, straight grinder, drum polisher, belt sander, tube polisher or die grinder, simply by changing the hand piece. This new machine has myriad applications in industrial steel fabrication, polishing operations, sheetmetal assembly, food processing and foodservice equipment builds, appliance manufacturing, various stainless steel fabrications including medical and more.

The Suhner Rotomax offers users a range of power from 2.0-4.7HP and features electronically-controlled speeds ranging from 500-15,000 RPM in increments of 100 RPM at the touch of a button. The combination of an industrial grade motor and solid-state electronic control ensure constant speed and torque during any application. With no gearing, the Rotomax operates very quietly.   Other features include soft start, integrated braking and an LED-displayed speed gauge.

The Rotomax is offered as a hanging model, for the user wishing to keep the power flex shaft above the work; on the basic stand, which can be mounted wherever the user desires; or on a specially-designed stable trolley (STM) for portability around the work shop or production line.

For more information, please contact:

SUHNER Industrial Products, LLC
43 Anderson Road SW
P.O. Box 1234
Rome, GA 30161
Phone 706/235-8046
Fax 706/235-8045
info.usa@suhner.com
www.suhner-abrasive-expert.com
Attention: Aaron Beck, National Sales Manager, Abrasives & Power Tools

Ann Arbor, Michigan – German Machine Tools of America (GMTA) today announces the appointment of Dan Thomas as Project Manager for this major supplier of various machine tools, lasers and parts washers to the North American automotive, off-highway, heavy equipment and other power transmission markets.

GMTA Vice President Scott Knoy comments, “We welcome Dan to our team. His role will be a vital part of our ongoing efforts to be more customer-centric, as we expand our machine offerings, penetrate new markets and expand existing ones.”

Thomas will be responsible for the end-to-end coordination of the project flow at GMTA, from initial contact through commissioning of machines and systems onsite.

GMTA is a major supplier of machining centers, integrated laser-based work cells, fully-automated parts washing lines and related tooling, focusing primarily on gear, spline and other power transmission components.

See us at IMTS!

For more information, please contact:

GMTA (GERMAN MACHINE TOOLS OF AMERICA)
4630 Freedom Drive
Ann Arbor, MI 48108
Phone: 734-973-7800
Fax: 734-973-3053
Web: www.gmtamerica.com
Email: scott@gmtamerica.com
Attention: Scott Knoy, VP